[Dstar] IC-91AD not transmitting while on the charger???!!!

[Mark Kyle]

Hi Guys

Chargers are for CHARGING not transmitting while on the charger....DC leads
are made for transmitting...I hope this clears up the situation


Regards


Mark Kyle


-----Original Message-----
From: dstar-bounces at lists.wia.org.au [mailto:dstar-bounces at lists.wia.org.au]
On Behalf Of Susan Mackay
Sent: Saturday, August 30, 2008 3:13 PM
To: dstar at lists.wia.org.au
Subject: Re: [Dstar] IC-91AD not transmitting while on the charger???!!!

Ross,

Thanks for the information. I had actually seen the comment in the  
owners manual as well, but I was not sure if it referred only to the  
specified chargers or all chargers. I'm using the one that came with  
the device - I think it has the type code BC-6167A/D. I did check that  
the unloaded voltage coming from the charger is a tad over 16V but I  
can't measure it when connected to the radio without stripping wires  
etc (which I don't want to do). The charger transformer itself says  
that the output is 12V @300mAm but it would appear to carry the part  
number BM-95V (or possibly AS-5993S???). I also note that the  
'supplied charger' is mentioned as having the part number BC-123 on  
the next page (page 11) so I have no idea.

Cheer,s

Susan
_______________________________________________
Dstar mailing list
Dstar at lists.wia.org.au
http://lists.wia.org.au/mailman/listinfo/dstar