[Dstar] No VK3RBA

[David Tilson]

 >  Caught me out then, I haven't seen any reference to it being 5
instead of 5.4mhz.  I'll have to reprogram the IC91AD now.

No problems Wenlock and I'm glad we worked out where the problem was.  
 
Australian D-STAR repeaters down at the bottom end of the 70cm repeater
segment normally use a 5.4MHz offset, but D-STAR repeaters at the top
end of the 70cm repeater segment, eg: 439.8 and above will normally use
a 5.0MHz offset to avoid potential LIPD interference on the repeater
input frequency.  
 
It always pays to check the offset though as a few other Australian
D-STAR repeaters have unexpected offsets based on their output
frequency, possibly to avoid LIPD interference.
 
Cheers,
 
davidt, VK3UR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.wia.org.au/pipermail/dstar/attachments/20090329/1dff3007/attachment.html